Carving of glass is a technique that is artistic and is used for inscribing symbols and creative designs in glasses. Sand-carving as a technique was developed back in the 19th century and was used for creating multilevel abrasive etchings on surfaces. When the design has been etched, light and shadow details are added. In looking to do glass carving Alberta residents have some helpful tips to consider. The carving is used to create gemstones, sculptures and windows among others.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
When the surface has been cleaned well, wiping is done using soft cloth so that it remains dry before the procedure is continued. The design that is to get carved is then chosen. Most experts of the arts and crafts advise that one uses stencil, simply because it comes with already existing designs. Some stencils have the added advantage of coming with adhesive backing to make the stick completely to surfaces.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
A layer of masking tape should be applied towards the edges of the stencils, more so in sections where they meet glass. This offers protection for parts that are not supposed to be carved. When such parts come into contact with the cream, the design will likely get ruined. The cream is placed onto the form brush and the brush used for evening out the application. The corners and edges should be watched closely to ensure the cream covers all sections.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are very many people that appreciate the beauty of carved glass. Such carvings will always be seen in shops that sell gifts, in glasses and also in fancy windows. The fact that there are not so many people that deal with the carvings means that as a business it can be very profitable.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
When the surface has been cleaned well, wiping is done using soft cloth so that it remains dry before the procedure is continued. The design that is to get carved is then chosen. Most experts of the arts and crafts advise that one uses stencil, simply because it comes with already existing designs. Some stencils have the added advantage of coming with adhesive backing to make the stick completely to surfaces.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
A layer of masking tape should be applied towards the edges of the stencils, more so in sections where they meet glass. This offers protection for parts that are not supposed to be carved. When such parts come into contact with the cream, the design will likely get ruined. The cream is placed onto the form brush and the brush used for evening out the application. The corners and edges should be watched closely to ensure the cream covers all sections.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are very many people that appreciate the beauty of carved glass. Such carvings will always be seen in shops that sell gifts, in glasses and also in fancy windows. The fact that there are not so many people that deal with the carvings means that as a business it can be very profitable.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
About the Author:
In order to become better informed about the process of glass carving Alberta residents should first review the details here at www.claudegarneaustudio.ca. To learn more, simply check out this homepage on http://www.claudegarneaustudio.ca.
0 nhận xét:
Đăng nhận xét