Don't be wary of "cheap". If you want new and cheap neckties, listen up. You can get good quality if you know what you want. Do you need a certain width or size? Do you want a readymade discount job or an expensive handmade Italian label? What is off the rack at one shop is different from another.
The first consideration is width as it can make or break your look: not too skinny and not too wide. There are some exceptions, however. Tall or big men like to balance their size with the right tie proportions. Younger men love the look of retro thin ties.
It is a matter of what is in style, what is regular (right now it is 3.75 inches), and what looks right. You don't get the same results from an off-the-rack budget item from a not-too-expensive outlet as you do from posh or expensive one. When measuring, try the dollar test. Fold a bill in half and you have a quick three-inch measuring tape.
When it comes to discerning quality, you have to look at fabric and construction. You have no doubt by now measured the width and length and are ready to look more deeply into fabrication. Good ties are made from silk which has a unique sheen and which ties and drapes masterfully. Synthetics just don't have the same ability.
Manufacturers do vary from time to time, so measurements are not always the same for a "regular" or average size tie. A millimeter here or there won't matter, an inch will. Once you know what looks good on you, this will be your benchmark for future purchases so you can't go wrong.
Another element of a good tie to notice is the slip stitch found on the back if you open the tie a bit. A loose black thread hangs lengthwise, not visible normally. It is not a defect but a "slip stitch" that runs down the center of the tie to encourage it to move up and down as you adjust your knot.
As you can see, construction matters and one tie is not as good as another. If you are really after superior quality, look for triple folds of cloth that has been across on the bias. Three panels thus make up the final tie. You can tell by running your finger along the fabric length. You should discern two distinct seams.
Good ties use fabric cut crosswise from a piece of cloth, never straight up and down. In addition, you should not see the various seams. You can feel them as when you are checking for two or three folds and you run your finger lengthwise down the tie. If you feel two seams, you have a winner. Finally, you want a good fit around the neck and a tie that knots easy and hangs smoothly. If you cannot accomplish all of these tasks mentioned above, you should pass on the tie.
The first consideration is width as it can make or break your look: not too skinny and not too wide. There are some exceptions, however. Tall or big men like to balance their size with the right tie proportions. Younger men love the look of retro thin ties.
It is a matter of what is in style, what is regular (right now it is 3.75 inches), and what looks right. You don't get the same results from an off-the-rack budget item from a not-too-expensive outlet as you do from posh or expensive one. When measuring, try the dollar test. Fold a bill in half and you have a quick three-inch measuring tape.
When it comes to discerning quality, you have to look at fabric and construction. You have no doubt by now measured the width and length and are ready to look more deeply into fabrication. Good ties are made from silk which has a unique sheen and which ties and drapes masterfully. Synthetics just don't have the same ability.
Manufacturers do vary from time to time, so measurements are not always the same for a "regular" or average size tie. A millimeter here or there won't matter, an inch will. Once you know what looks good on you, this will be your benchmark for future purchases so you can't go wrong.
Another element of a good tie to notice is the slip stitch found on the back if you open the tie a bit. A loose black thread hangs lengthwise, not visible normally. It is not a defect but a "slip stitch" that runs down the center of the tie to encourage it to move up and down as you adjust your knot.
As you can see, construction matters and one tie is not as good as another. If you are really after superior quality, look for triple folds of cloth that has been across on the bias. Three panels thus make up the final tie. You can tell by running your finger along the fabric length. You should discern two distinct seams.
Good ties use fabric cut crosswise from a piece of cloth, never straight up and down. In addition, you should not see the various seams. You can feel them as when you are checking for two or three folds and you run your finger lengthwise down the tie. If you feel two seams, you have a winner. Finally, you want a good fit around the neck and a tie that knots easy and hangs smoothly. If you cannot accomplish all of these tasks mentioned above, you should pass on the tie.
About the Author:
Read more about Some Of The Things You Need To Know When Buying And Wearing Cheap Neckties.
0 nhận xét:
Đăng nhận xét